5. Change log

5.1. Version 3.2.2

Release date: 2024-06-25

The full list of changes between version 3.2.2 and 3.2.1 can be viewed on github. [v3.2.1…v3.2.2]

Minor changes

  • Clarify use of TLS 1.3 for encrypted communication. [149]

  • Reset timer for updateRate when sendOnChange is triggered. [157]

Clarifications

  • Use the term “status”/”command” instead of “object”. [131]

  • Clarify that every message should have a unique GUID. [134]

  • Clarify description of unimplemented status/commands. [136]

  • Clarify that all commands arguments need to be present. [137]

  • Update section about SXL. [138]

  • Clarify transport section. [155]

  • Clarify communication establishment between sites. [156]

  • Update tables to include SXL/site configuration in YAML format. [159]

  • Clarify that alarm priority affects state bits 3,4 and 5. [162]

  • Clarify the error case when object type doesn’t match the signal [164]

5.2. Version 3.2.1

Release date: 2023-10-03

The full list of changes between version 3.2.1 and 3.2 can be viewed on github. [v3.2…v3.2.1]

Important changes

  • Add timestamp as a data type in RSMP Core. Time stamp is a commonly used in the TLC SXL. This means that there is no need for duplicate definitions. No changes to the protocol itself. [101]

  • Only use JSON types. This means that “long” and “real” data types are removed since they don’t exist in the ECMA standard. The data type “number” is added instead. [82]

Minor clarifications

  • Add separate section for error handling. No changes to the protocol. [114]

  • Include the full changelog.

  • Correct spelling mistakes and fix minor issues.

5.3. Version 3.2

Release date: 2022-06-23

Important changes

  • Buffered messages. The ‘q’ field in StatusUpdate should be changed when sending buffered messages. [73]

  • Case sensitive. RSMP is now case sensitive. [35]

  • Connect to multiple supervisors. Each site needs to support multiple RSMP connections (if required in the SXL). [19]

  • Array type. Add ability to send a list of values [63]

Minor clarifications

  • Clarify when commands/requests can be sent [34]

  • Table in chapter 4.5.1.6 updated [55]

  • The list of participants in the RSMP Nordic collaboration updated. [67]

  • Fix in changelog for 3.1.3 “ageState” [69]

  • How to reject a RSMP connection [38]

  • How to determine RSMP version during handshake [43]

  • Allow update of subscription interval time by sending new subscription request [52]

  • Aggregated status without any bits set [57]

  • Subscriptions should not persist across restarts/power outage [74]

  • CommandRequest and CommandResponse can contain multiple requests/responses [58]

  • null or empty string is allowed in functionalPostion/state [45]

  • Respond with MessageNotAck if security code is incorrect [79]

5.4. Version 3.1.5

Release date: 2020-10-30

MessageAck must be prioritized over buffered messages

During communication establishment there may be buffered messages that needs to be sent by the equipment. Sending any buffered messages is part of the communication sequence, but it may take a long time to empty the buffer in case of a slow network or long communication interruption. The equipment must prioritize to respond with MessageAck to any requests that the supervision system may send during this time. Discussed in [4]. View changes

Don’t send new alarms if they’re already active

Clarify that new alarms shouldn’t be sent if the alarm is already active. No changes to the protocol itself. Discussed in [18]

Ability to request alarms and aggregated status

Discussed in [22]

Status subscriptions and update on change+interval

Discussed in [21]

5.5. Version 3.1.4

Release date: 2017-11-03

Alarm timestamps

The Alarm timestamp (aSp) now also represents when the alarm changes status, for instance when alarms turns inactive. See issue [1]

Encryption

Implementation of encryption support in the equipment is no longer mandatory (it was introduced in 3.1.3)

Connection establishment/handshake

The connection establishment sequence has been clarified. The site begins sending the version message. All alarms (not just active and blocked) are sent during connection establishment. Alarms may have turned inactive during communication interruption. [3]

Communication interruption

Buffering should be possible to enable/disable for each status

If the version message hasn’t been successfully exchanged, then the system/system must not respond with MessageAck/MessageNotAck to any RSMP messages other than the version message. If no Ack is received then the equipment and supervision system treats this a communication interruption and disconnects. The site then reconnects with proper handshake according to the connection establishment sequence.

Watchdog

The time sync using watchdog should be possible to enable/disable in the site

Clarifications

  • The XML examples has been removed. Only JSon is used for message exchange

  • Message exchange diagrams has been improved

5.6. Version 3.1.3

Release date: 2014-11-24

Important changes

  • Encryption. All traffic should be possible to encrypt if required. Both supervision systems and sites should have to possibility to easily enable/disable encryption. SSL 3.0/TLS 1.0 or later should be used. Certificates is used to verify the identities for equipment. Equipment that uses RSMP should contain a interface for easy management of certificates. Generating of new certificates or renewal should be made by the client. Installation of new certificated should be done with consultation of the client.

  • Added figures of message exchange during communication establishment

  • Extended chapter about communication between sites

  • Aggregated status is also sent between sites in order to inform about any active alarms

  • The data types raw, scale, unit and ordinal removed since they are too ambiguous

  • Subscriptions are not cancelled at communication interruptions. Cancelling subscriptions means that those messages are lost which makes debugging harder

  • Active and blocked alarms are sent at communication reestablishment, but alarms which are not sent doesn’t need to be interpreted as inactive since they are expected to be sent as part of buffered messages.

  • 1000 buffered messages now changed to 10000 as minimum buffer size

  • “q” can now have the state of “undefined” in case the object does not exist.

  • With the exception of aggregated status only JSon string elements are used, and JSon number or boolean elements are not used. Some examples used wrong types and have been updated.

  • If an object is not known during status request or command request, the site must not disconnect but instead reply with “q” set to “undefined”

  • If a subscription is already active on a given status then the site should not establish a new subscription but use the existing one. StatusUpdate should not be sent as response in this case.

  • The watchdog interval duration must be configurable with a default sent to once 1 minute (60 seconds)

Adjustments

  • Chapter 4.1 (page 6): Typo. Five messages types are actually four.

  • Chapter 5.5.1 (page 38). Typo in the table for JSon, “timestamp” should be “aTs”

  • Chapter 5.5.1 (page 38): In the aggregated status, “name” is a positional element in JSon

  • Chapter 5.5.3.2 (page 41): Unused elements remained in the examples for alarm acknowledgment message. “ack”, “aS”, “sS”, “aTs”, “cat”, “pri”, “rvs”

  • The abbreviation SUL (for signal exchange list) changed to SXL

  • Appendix 6.3.2 (page 7). Command messages has no return values. In RSMP 3.x and later commands only returns values based on the arguments in CommandResponse

  • Fix typo. Incorrectly used “ageState” instead of “q”

Clarifications

  • Chapter 5.3.1 (page 8): Clarification regarding the prerequisites when using separate signal exchange lists for different sites

  • Chapter 5.3.2 (page 8): Clarification regarding reconnection after communication disruption. The site should automatically try to reconnect.

  • Chapter 5.3.2 (page 8): As a default any active subscriptions should remain active during a communication interruption since they can be sent when connection is reestablished. But subscriptions of data of less importance and that may cause the buffer to reach is max capacity does not need to remain active. Which subscriptions to maintain must be configurable and done with consultation with the client.

  • Chapter 5.4.1 (page 11): Clarification regarding how alarm acknowledgement works

  • Chapter 5.5.3.4 (page 40): Structure of message for deactivation of blocked alarm added.

  • Appendix 6.7.3 (page 12). Chapter of recommendations of contents in the SXL can be removed since alarm and aggregated status is always sent during communication establishment

  • Appendix 6.4 (page 9). Chapter of configurable data areas removed since it is not used.

5.7. Version 3.1.2

Release date: 2012-02-29

The following typos has been fixed:

  • Chapter 5.5.3.1 (page 38). “ts” should be “aTs”

  • Chapter 5.5.6.2 (page 37). “aTS” should be “cTS”

  • Chapter 5.5.1 (page 35). “returnvalues” should be “sS”

  • Chapter 5.5.1, 5.5.8.1 (page 36, 50) “sIds” should be “siteId”

  • Chapter 5.5.5.5 (page 46). “StatusUnSubscribe” should be “StatusUnsubscribe”

  • Chapter 5.5.1, 5.5.6.1 (page 36, 47). “co” should be “cO”

The following clarifications has been made:

  • On page 10,11,17,18,36,41: SequenceNumber removed completely (should have been removed already in previous version)

  • Appendix, page 13: Alarm messages are also sent at alarm blocking

  • Chapter 2: (page 2,4): Definitions of “NTS”, “Object”, NTS Object” and “component” updated. Added definition of “aggregated object”, “NTS object type” and “component id”

  • Chapter 5.4. (page 9, 11-14): Clarification regarding descriptions of “ntsObjectId”, “externalNts”, “componentId”, “alarmCodeId”, “externalNtsAlarmCodeId”, “category” and “description”

  • Chapter 5.4.6.1.1 (page 32-33) and appendix 6.2.2 (page 5). Clarifications regarding usage of siteId.

  • Appendix 6.1.3 (page 4): Clarification regarding object definitions

  • Appendix 6.2 (page 5,6,7): Clarification regarding descriptions about “componentId”, “ntsObjectId”, “externalNtsId”, “alarmCodeId”, “description”, “externalAlarmCodeId”, “category”, “functionalState”, “functionalPosition” and “Maneuver”

5.8. Version 3.1.1

Release date: 2011-12-23

  • Command message (commandCodeId) moved to argument/return value. This makes it possible to send multiple commands in the same message.

  • “ageState” was on the wrong place in the examples

  • “value” renamed to “status” in status messages

  • Clarified description of “siteId”

  • Version message: “ntsObjectId” replaced with “siteId”. All site identities (siteId) which are included in the communication is sent in the version message as a list.

  • Adjusted the format of aggregated status in JSon. Sent as an array instead

  • Time stamp in JSon adjusted. Now uses the same format as XML

  • Clarification regarding the usage of JSon string elements

5.9. Version 3.0

Release date: 2011-11-04

  • NTSObjectId changed to NTSOId in JSon

  • All active alarms and blocked alarms are sent at restored communication, not just the changed alarm statues. All alarms which are not sent can therefore be interpreted as inactive. This proves a more complete update of all alarms in case the equipment has been reset and the current state of all alarms are unknown.

  • Figures for the communication exchange for version and status updated

5.10. Version 2.0

  • Same as version 1.0 below

5.11. Version 1.1o

Release date: 2011-11-02

  • sequenceNumber is removed from all message types

5.12. Version 1.1n

Release date: 2011-11-02

  • requestId (rId) removed. Sufficient data is available to tie a response to a request

  • sequenceNumber (sNr, seqNr) is removed from status messages, but is kept in all other messages (alarm, events, aggregated status) which has used this since earlier.

  • Typo for sequenceNumber in Json for event message (seqNr) fixed (sNr).

  • “unknown” added as a possible ageState

  • Clarification of aggregated status, 8-bit definition

  • siteId changes name to ntsObjectId in SXL and message exchange. The exception is title for site in SXL. SXL Template updated.

  • Alarm message adjusted so that is possible to determine if the alarm is issued, acknowledged or blocked (alarmSpecialistion)

  • Time stamp for an alarm is issued (alarmTimestamp), acknowledged (ackTimestamp) and blocked (suspendTimestamp) merged to “timestamp”. All examples updated

  • Event messages is removed. All functionality of event messages is provided with status messages. The exception is the possibility who cased an event (supervision system or site), but this is better fitted to be added in the SXL, where applicable. Beyond this some of the recommendations is removed for the appendix, (Equipment starting, shuts down), message blocking active/inactive). Supervision system is expected to manage this anyway.

  • Clarifications of in which order each message is sent at communication establishment (RSMP/SXL version, watchdog, …)

  • Adjusted requirement of communication buffer. Change to last 10000 messages. FIFO should be used.

  • Description fields (description, desc) is removed from alarm and statusmessages but is kept in SXL.

  • Clarified that subscriptions is cancelled at communication disruptions

  • References to VV:publ 2007:54 ISSN 1401-9612 for format of alarmCodeId/statusCodeId/commandCodeId

5.13. Version 1.1m

Release date: 2011-11-01

  • Fixed JSon example. It stated ctId instead of cId for componentId

  • Removed incorrect text about prerequisites for sending in the appendix, page 6 - which was a residual from event message 2011-09-27 Change name of alarms, events, status and commands for two letter prefix AL, EV, IS, MA, to a single letter prefix: A, H, S, M.

  • Revision of SXL, Version of RSMP and watchdog configuration removed as recommended messages in SXL (appendix)

  • The recently added column Object (optional) which is used for in a easier way tie alarms to individual objects is now also added for events, status and commands.

  • Removed TYPE and VALUE for all message types (remains in SXL)

  • Description removed from status message (remains in SXL)

5.14. Version 1.1l

Release date: 2011-11-30

  • New design of status messages

    • Makes it possible to send multiple requests in a single message and receive response in a single message

    • Makes it possible to subscribe to multiple status values, either by interval or on change

    • sequenceNumber (sNr) removed

    • “description” removed

    • “type” and “unit” removed (still left in SXL)

5.15. Version 1.1k

Release date: 2011-10-26

  • Added a new message type for sending version of RSMP and revision of SXL, (rsmpVersion and sxlRevision)

5.16. Version 1.1j

Release date: 2011-10-25

  • Remove global time stamp for all message types

  • Added timestamp for alarm acknowledgement, alarm blocking and watchdog for each message type

  • Watchdog message reduced in size by removing siteId, externalNtsId and componentId

  • Message acknowledgement reduced in size by removing messageId (only originalMessageId)

  • Watchdog is now sent in both directions and should be used for time synchronization

5.17. Version 1.1i

Release date: 2011-10-24

  • Fixed JSon example. It stated ctId instead of cId for componentId

5.18. Version 1.1h

Release date: 2011-10-20

  • Typo in XML code 12

  • SXL template: new column Object (optional)) in alarm sheet

    The purpose is that you should be a able to specify alarms for a specific object per site, since e.g a passage detector have several lasers with different alarm descriptions and id depending in where the detector is located. This extra column defines the specific object name, e.g. “Passage detector DP1’. If this column is left blank it means that this specific alarm is used for all “Passage detector” objects.

  • Added text about wrapping of JSon packets

  • Added text about time stamps in JSon, and updated all JSon examples

5.19. Version 1.1g

Release date: 2011-10-06

  • Updated JSon examples

  • Long as data type

  • SXL template updated to match “configurable data areas”

5.20. Version 1.1f

Release date: 2011-10-05

  • Updated text about version management

  • Continued work about “Integer” and “real as data types

5.21. Version 1.1e

Release date: 2011-10-04

  • Text about configurable data areas added in the appendix

  • “Integer” and “real” as data types in arguments and return values

    (some work still needed)

  • Text about version management

5.22. Version 1.1d

Release date: 2011-09-27

  • Add suggested changes from Acobia. TCP/IP as a definition

  • Updated Data and transport chapter. JSon and pure TCP connection

  • Added a new column in SXL which defined which prerequisites control when a event message is sent. The specification also updated

5.23. Version 1.1c

Release date: 2011-09-26

  • Remove argument at status request. There is no good reason for using arguments when command messages are better suited. No SXL uses this

  • Move “command” in command message to argument. This enables multiple commands to be sent in a single message

  • Added more JSon examples (watchdog + message acknowledements MessageNotAck)

5.24. Version 1.1b

Release date: 2011-08-19

  • Added chapter about JSon

  • Removed “status” in StatusRequest. (No SXL uses this)

  • Added time stamp in command responses (commandTimeStamp) and aggregated status (aggstatusTimeStamp)

5.25. Version 1.1a

Release date: 2011-05-25

  • Typo on page 7

  • Typo on page 11 (appendix)

5.26. Version 1.0

Release date: 2011-05-20

  • Clarifications regarding the signal exchange list added

  • Clarifications about transport layer

(Unofficial versions 1.1 and 2.0 are equal to this version)

5.27. Version 1.0b

Release date: 2011-01-12

  • Added watchdog as separate message type

5.28. Version 1.0a

Release date: 2010-10-08

  • This version was used for the variable speed signs

  • No changes since 0.97

5.29. Version 0.97

Release date: 2010-10-07

  • “number”, “boolean” and “ordinal” added as possible data types in “type”

  • Clarifications regarding binary data format (base64)

5.30. Version 0.96

Release date: 2010-09-23

  • Major update of the object model

    • The Object “returnvalue” and “argument” adjusted for global usage with it’s associated contents. This removes limitations of the number of data values which can be included in a single message

    • Bit value of “aggregated status” redesigned for increased readability

5.31. Version 0.95

Release date: 2010-09-01

  • Minor adjustments of the document formatting

5.32. Version 0.94

Release date: 2010-08-31

  • Update of the object model * Namespace “message” removed * Added format, unit, value1 and value2 to alarm messages * actionCodeId renamed to eventCodeId in event messages * externalActionCodeId renamed to externalEventCodeId in event messages * functionalPosition data structure redesigned * “messageSpecialistation redesigned in status messages

  • Clarifications about optional fields

  • Added manufacturer specific alarm message (externalAlarmCodeId) in the XML example in 4.1.1.1

  • Message acknowledgement updated and the ability to sent error message if the receiver didn’t understand the message added

5.33. Version 0.93

Release date: 2010-08-27

  • On page 15 and 17 it was incorrectly stated that acknowledgement messages (and not alarm messages) should be sent to supervision system in case alarms are acknowledged locally.

  • New figure for the message exchange for alarms in order to clarify the message exchange and make the figure more consistent with the other message types. No functional changes has been made

  • Clarify figures regarding:

    • Message exchange when alarms are acknowledged/blocked locally

    • Message exchange is not dependent of being send/received in any particular order

  • “alarmState” could enter two values, “ok” and “active”. This has been changed to “inactive” and “active”

5.34. Version 0.92

Release date: 2010-06-23

This version was distributed with the specifications for variable speed signs.