Signal Groups

Tests

• Signal Groups follow startup sequence after yellow flash
• Signal Groups is ordered to green with M0010
• Signal Groups is ordered to red with M0011
• Signal Groups list size is read with S0017
• Signal Groups red/green predictions is read with S0025
• Signal Groups state is read with S0001

Signal Groups follow startup sequence after yellow flash

Verify that we can activate normal control after yellow flash mode is turned off

1. Given the site is connected and in yellow flash mode
2. When we activate normal control
3. All signal groups should go through e, f and g

View Source

it 'follow startup sequence after yellow flash' do
  skip 'requires sxl >= 1.0.7' unless RSMP::Validator.sxl_matches?('>=1.0.7')
  with_site(:connected) do |site_proxy|
    verify_startup_sequence(site_proxy) do
      timeout = RSMP::Validator.get_config('timeouts', 'yellow_flash')
      site_proxy.tlc.set_functional_position!('YellowFlash', within: timeout)
      command_timeout = RSMP::Validator.get_config('timeouts', 'command_response')
      site_proxy.tlc.set_functional_position!('NormalControl', within: command_timeout)
    end
    command_timeout ||= RSMP::Validator.get_config('timeouts', 'command_response')
    site_proxy.tlc.set_functional_position!('NormalControl', within: command_timeout)
  end
end

Signal Groups is ordered to green with M0010

Validate that a signal group can be ordered to green using the M0010 command.

1. Given the site is connected
2. When we order a signal group to green with M0010
3. Then we should receive a confirmation

View Source

it 'is ordered to green with M0010' do
  with_site(:connected, sxl: '>=1.0.8') do |site_proxy|
    component = RSMP::Validator.get_config('components', 'signal_group').keys[0]
    timeout = RSMP::Validator.get_config('timeouts', 'command_response')
    site_proxy.tlc.order_signal_start!(component, within: timeout)
  end
end

Signal Groups is ordered to red with M0011

1. Given the site is connected
2. When we order a signal group to red with M0011
3. Then we should receive a confirmation

View Source

it 'is ordered to red with M0011' do
  with_site(:connected, sxl: '>=1.0.8') do |site_proxy|
    component = RSMP::Validator.get_config('components', 'signal_group').keys[0]
    timeout = RSMP::Validator.get_config('timeouts', 'command_response')
    site_proxy.tlc.order_signal_stop!(component, within: timeout)
  end
end

Signal Groups list size is read with S0017

Verify status S0017 number of signal groups

1. Given the site is connected
2. Request status
3. Expect status response before timeout

View Source

it 'list size is read with S0017' do
  with_site(:connected, sxl: '>=1.0.7') do |site_proxy|
    site_proxy.request_status_and_collect({ S0017: [:number] },
                                          within: RSMP::Validator.get_config('timeouts', 'status_response')).value!
  end
end

Signal Groups red/green predictions is read with S0025

Verify that time-of-green/time-of-red can be read with S0025.

1. Given the site is connected
2. Request status
3. Expect status response before timeout

View Source

it 'red/green predictions is read with S0025' do
  with_site(:connected, sxl: '>=1.0.13') do |site_proxy|
    component = RSMP::Validator.get_config('components', 'signal_group').keys.first
    site_proxy.request_status_and_collect(
      { S0025: %i[
        minToGEstimate
        maxToGEstimate
        likelyToGEstimate
        ToGConfidence
        minToREstimate
        maxToREstimate
        likelyToREstimate
      ] },
      component: component,
      within: RSMP::Validator.get_config('timeouts', 'status_response')
    ).value!
  end
end

Signal Groups state is read with S0001

Verify that signal group status can be read with S0001.

1. Given the site is connected
2. Request status
3. Expect status response before timeout

View Source

it 'state is read with S0001' do
  with_site(:connected, sxl: '>=1.0.7') do |site_proxy|
    site_proxy.request_status_and_collect(
      { S0001: %i[signalgroupstatus cyclecounter basecyclecounter stage] },
      within: RSMP::Validator.get_config('timeouts', 'status_response')
    ).value!
  end
end