Traffic Light Controller Emergency Route

Tests

Emergency route can be activated with M0005 and read with S0006

Verify that emergency routes can be activated with M0005. S0006 should reflect the last route enabled/disabled.

  1. Given the site is connected.
  2. When we send M0005 to set emergency route.
  3. Then we should get a command responds confirming the change.
View Source 
emergency_routes = Validator.get_config('items','emergency_routes')
skip("No emergency routes configured") if emergency_routes.nil? || emergency_routes.empty?
def set_emergency_states task, emergency_routes, state
  emergency_routes.each do |emergency_route|
    set_emergency_route emergency_route.to_s, state
  end
  wait_for_status(task, "emergency route #{emergency_routes.last} to be enabled",
    [
      {'sCI'=>'S0006','n'=>'status','s'=>(state ? 'True' : 'False')},
      {'sCI'=>'S0006','n'=>'emergencystage','s'=>(state ? emergency_routes.last.to_s : '0')}
    ]
  )
end
Validator::Site.connected do |task,supervisor,site|
  prepare task, site
  set_emergency_states task, emergency_routes, false
  begin
    set_emergency_states task, emergency_routes, true
  ensure
    set_emergency_states task, emergency_routes, false
  end
end

Emergency route emergency route is read with S0006

Verify that current emergency route can be read with S0006. Depreciated from 1.2, use S0035 instead.

  1. Given the site is connected.
  2. When we request S0006.
  3. Then we should receive a status response.
View Source 
Validator::Site.connected do |task,supervisor,site|
  request_status_and_confirm site, "emergency route status",
    { S0006: [:status,:emergencystage] }
end

Emergency route emergency route is read with S0035

Verify that current emergency routes can be read with S0035.

  1. Given the site is connected.
  2. When we request S0035.
  3. Then we should receive a status response.
View Source 
Validator::Site.connected do |task,supervisor,site|
  request_status_and_confirm site, "emergency route status",
    { S0035: [:emergencyroutes] }
end

Emergency route emergency routes can be activated with M0005 and read with S0035

Verify that emergency routes can be activated with M0005. S0035 should show all active routes.

  1. Given the site is connected.
  2. When we send M0005 to set emergency route.
  3. Then we should get a command responds confirming the change.
  4. When we request the current emergency routes with S035.
  5. Then we should receive the list of active routes.
View Source 
def enable_routes task, emergency_routes
  emergency_routes.each { |emergency_route| set_emergency_route emergency_route.to_s, true }
  routes = emergency_routes.map {|i| {'id'=>i.to_s} }
  wait_for_status(task, "emergency routes #{emergency_routes.to_s} to be enabled",
    [ {'sCI'=>'S0035','n'=>'emergencyroutes','s'=>routes} ]
  )
end
def disable_routes task, emergency_routes
  emergency_routes.each { |emergency_route| set_emergency_route emergency_route.to_s, false }
  routes = []
  wait_for_status(task, "all emergency routes to be disabled",
    [ {'sCI'=>'S0035','n'=>'emergencyroutes','s'=>routes} ]
  )
end
emergency_routes = Validator.get_config('items','emergency_routes')
skip("No emergency routes configured") if emergency_routes.nil? || emergency_routes.empty?
Validator::Site.connected do |task,supervisor,site|
  prepare task, site
  disable_routes task, emergency_routes
  begin
    enable_routes task, emergency_routes
  ensure
    disable_routes task, emergency_routes
  end
end